| Product: 500W Single Output Industrial DC to DC converter (147mm width) |
|
|
Series
| Model No.
| Output Watts
| Input Voltage | Input range
| 120
| STC-120500XXIW | 500W continuous | ±120V DC
| ±80V ~ ±150V DC | 48
| STC-48500XXIW | 500W continuous | ±48V DC
| ±36V ~ ±72V DC | 24
| STC-24450XXIW | 450W continuous | ±24V DC
| ±19V ~ ±35V DC | 12
| STC-12400XXIW | 400W continuous | ±12V DC
| ±9V ~ ±18V DC | 12
| STC-12250XXIW | 250W continuous | ±12V DC | ±9V ~ ±18V DC |
ENVIRONMENTAL CONDITIONS:
● Cooling: Forced Air-cooling, 40x40x20mm Fan x 2 (With 2 Ball Bearing) (STC-1225012IW)
Forced Air-cooling, 40x40x28mm Fan x 2 (With 2 Ball Bearing) (for other models)
● Fan brand: DELTA, NMB, SUNON, SUNON IP68 (for H version). Specifications are equivalent
● Operating Temperature: 0°C ~ +50°C (-20°C~+60°C optional) Full Load
● Operating Humidity: 20%~85% RH. (Non condensing)
● Storage Temperature: -20°C~+80°C
● Storage Humidity: 10%~90% RH. (Non condensing)
● Operating Altitude: 10M Below Sea level and 3000M Above Sea level
DC INPUT CHARACTERISTICS:
● Input connector type: 40A / 300V Single table type Terminal x 2
● Input Current:
| 9A/14A | 250W @12V DC input Full Load High Line & Low Line | | 27A/53A | 400W @12V DC input Full Load High Line & Low Line | | 14A/29A | 450W @24V DC input Full Load High Line & Low Line | | 7.8A/15.7A | 500W @48V DC input Full Load High Line & Low Line | | 3.67A/6.9A | 500W @120V DC input Full Load High Line & Low Line |
DC OUTPUT CHARACTERISTICS: | Output Voltage | Regulation | Output Current table
| Ripple & Noise | | Load | Line | Cross | 500W | 450W | 400W | 250W | | Min. | Max. | Min. | Max. | Min. | Max. | Min. | Max. | | +5V | ±5% | ±1% | ±5% | 0A
| 100A | 0A
| 90A | 0A
| 80A | 0A | 50A | 50mV | | +12V | 0A | 41.67A | 0A | 37.5A | 0A | 33A | 0A | 20A | 120mV | | +24V | 0A | 20.83A
| 0A | 18.75A
| 0A | 16.6A
| 0A | 10.4A | 240mV | | Maximum continuous total DC output power shall not exceed | 500 | 450 | 400 | 250 | Wattage |
OVERALL PERFORMANCE:
● Efficiency: 80% typical @12V DC Input Full Load
85% typical @24V DC Input Full Load 87% typical @48V DC Input Full Load
90% typical @120V DC Input Full Load
● Hold up time:
● Rise time:
● Power Good Signal: TTL Compatible signal, on delay 100~500ms, off delay 1ms min
● Short Circuit Protection (SCP): Output is equipped with SCP (shutdown and latch off)
● Over Power Protection (OPP): Peak power protected to 130%±10% of continuous rated power (shutdown and latch off)
● Over Voltage Protection (OVP): +5V or 12V or 24V DC
RELIABILITY:
● MTBF (Mean Time Between Failure): 95 000 hours @max. Load, 12V, 24V DC & 25°C ambient
● Safety Standards: Meet IEC60950-1, EN60950-1
● Safety Approved:
● EMI Compatibility (EMC) Standard: EN55032:2015/AC:2016, CISPR32:2015, EN61000-3-2:2014,
EN61000-3-3:2013, EN55024:2010 +A1:2015
ISOLATION:
● INPUT and OUTPUT are isolated by transformers and optical couplers
● Dielectric Withstand INPUT to OUTPUT: 500V DC for 60 seconds
● Dielectric Withstand INPUT to frame GROUND: 500V DC for 60 seconds
● Leakage Current: <0.005μA @12V, 24V, 48V DC
Output Connector specific:
● 25A/300V UL Approved 3-Pin Terminal
Power chassis Dimension: | STC-1225012IW | 140(L) x 147(W) x 40.5(H) mm / 5.51(L) x 5.78(W) x 1.59(H) Inches | | All other models | 148(L) x 147(W) x 40.5(H) mm / 5.51(L) x 5.78(W) x 1.59(H) Inches |
● 1.2 kg / 2.65 Lbs
Gross Weight:
● 2.1 ~ 2.4 kg / 4.63 ~ 5.29 Lbs
Packing Detail:
● 8 pcs
Measurement of Carton:
● 0.028 m³ / 1 Cuft
Optional Input Connector pictures:
 
SPECIFICATIONS:
|
| Dealer: Synoceantech |
|
| Add to collections |
|
|
|
