Product: ±120V DC Input 600W Single Output Industrial DC converter |
|
|
Series
| Model No.
| Output Watts
| Input Voltage | Input range
| Polarity Protection
| Output Voltage
| 120
| STC-120600XX
| 600W continuous | ±120V DC
| ±90V ~ ±145V DC
| No
| +XX V DC
| Output Voltage: XX (X=0~9)
ENVIRONMENTAL CONDITIONS: ● Cooling: Forced Air-cooling, 80x80x25 mm Fan x 1 (With Two Ball Bearing) ● Fan brand: DELTA, NMB, SUNON, SUNON IP68 (for H version). Specifications are equivalent ● Operating Temperature: 0°C~+50°C (-20°C~+60°C, H version is optional) Full Load ● Operating Humidity: 20%~85% RH. (Non condensing) ● Storage Temperature: -20°C~+80°C ● Storage Humidity: 10%~90% RH. (Non condensing) ● Operating Altitude: 10M Below Sea level and 3000M Above Sea level
DC INPUT CHARACTERISTICS: ● Input connector type 25A/300V UL Approved 3-Pin Terminal ● Input connector type Make sure to plug the power source according to the label instruction
● Input & Inrush Currents
Output Power | Input Current @ Full Load High Line & Low Line | Inrush Current @ Cold start @25C ambient | 600W | 4.75A/7.5A | Less than 50A |
DC OUTPUT CHARACTERISTICS: Output Voltage | Regulation status | Output Current table
| Ripple & Noise | Load | Line | Cross | 300W | 400W | 450W | 600W | Min. | Max. | Min. | Max. | Min. | Max. | Min. | Max. | - | ±5% | ±1% | ±5% | - | - | - | - | - | - | - | - | 50mV | 12V | - | - | - | - | - | - | 0A | 50A | 120mV | 24V | - | - | - | - | - | - | 0A | 25A | 240mV | 48V | - | - | - | - | - | - | 0A | 12.5A | 480mV |
OVERALL PERFORMANCE: ● Efficiency 80-85% @120V typical @ Full Load ● Hold up time ● Rise time ● Power Good Signal ● Short Circuit Protection (SCP) All output equipped with SCP (shutdown and latch off) ● Over Power Protection (OPP) Peak power protected to 130%±10% of continuous rated power (shutdown and latch off) ● Over Voltage Protection (OVP)
RELIABILITY: ● MTBF (Mean Time Between Failure):>100 000 hours @max. Load & 25°C ambient ● Safety Standards: Meet IEC60950-1, EN60950-1 ● Safety Approved: ● EMI Compatibility (EMC) Standard:EN55032:2015/AC:2016, CISPR32:2015, EN61000-3-2:2014, EN61000-3-3:2013, EN55024:2010 +A1:2015
ISOLATION: ● INPUT and OUTPUT are isolated by transformers and optical couplers ● Dielectric Withstand: 120V: INPUT to OUTPUT & INPUT to frame GROUND: 2.5kV DC for 60 second ● Leakage Current: <0.005µA @120V DC
Output Connector specific: ● Terminal Block
PCB specific: ● 4 layer ● Copper: 3 Oz ● Thickness: 1.6mm ● Material: FR4 ● PCB material origin: Taiwan
Power chassis Dimension: STC-120600XX | 184(L) x 150(W) x 86(H) mm / 7.24(L) x 5.9(W) x 3.37(H) Inches |
Net Weight: ● 2.6 kg / 5.73 lbs
Gross Weight: ● 3kg / 6.61 lbs
Packing Detail ● 8 PCs
Measurement of Carton ● 0.042 m³ / 1.49 Cuft
Input Terminal picture:
|
Dealer: Synoceantech |
|
Add to collections |
|
|
|